The Lockwood range of economy door closers is particularly quick and easy to install on most applications, ideally suitable where cost is a high priority.
Multi position mounting template enables adjustment on site to meet most conditions also low stock holding as one model will cover 3 power sizes.
· Suitable for doors up to 1100 mm in width.
All products include:
· parallel arm bracket;
· multi strength mounting (one model covers size 2, 3 and 4)
· parallel arm size 2 and 3.
The power of the door closer is altered by adjusting the position of the door closer body on the mounting template.
Adjustment: Independent valves control closing and latching speeds which can be readily adjusted on site when required
Power : EN power selectable 2 to 4
Back check (BC) Available in this series, specify BC if required. Back check cushions or slows the door prior to reaching final opening position.
Finishes: Silver backed enamel
Handing: Non-handed. Suitable for left- or right-hand doors
Hold-Open Available in this series, specify HO. Hold-open option is not approved on any fire door.
Materials: High purity die cast aluminium housing with hardened steel rack pinion mechanism.
Mechanism: Rack and pinion design
Mounting Regular, parallel and over-door.
Standard Arm: 2024SIL
Standard Arm with BC: 2024BCSIL
Hold open: 2024HSIL
Offset arm: 2024BCOPSIL
Standards and Compliance
The Lockwood 2024 series closer has been successfully tested up to four hours (depending on type of doorset) on fire door assemblies in accordance with Australian Standard AS1905.1:2005, Part: Fire Resistant Door sets.
Note: Hold open option is not approved on any fire door.